The Benefits of Injection Molded Cases

benefits of injection molded cases
When it comes to developing a high quality product at a price that customers can afford, Packaging Strategies Incorporated exceeds all expectations. One of the ways PSI has been able to produce quality custom cases for the Baltimore area is through injection molded cases. While this method of case production may not seem beneficial, it actually holds several benefits for both the consumer and producer. Some benefits of using injection molded cases include:

1. Production can be made quickly, putting the product in the hand of the consumer quicker.
2. Customization is easier with the option to add fillers and inserts.
3. Hinges and locks can also be added during the production process.
4. Waste is almost non-existent. Any scrap material can be grounded down to be reused.
5. Post production is normally unnecessary, cutting labor cost.
6. Different types of material can be used during the process at the same time.

Materials that can be used are broken down into three different categories of polymers:

1. Thermoplastics- Polystyrene, nylon, polyethylene
2. Thermosets- Phenolic, Epoxy
3. Elastomers

The process to make the injection molded cases can be broken down into four different “times”. These times are as follows:

1. Fill Time- The time it takes for air to be removed from the mold cavity.
2. Pack Time- The time it takes to fill the mold with the material of choice.
3. Cool Time- The time it takes for the material to cool or set.
4. Dead Time- The time it takes for the part to be removed from the mold and the mold to be reset.

PSI strives to create a durable product for our consumers that will not only meet their casing needs, but exceed their expectations. PSI has been serving the Baltimore area for over 50 years and continues to lead the area in the custom cases and shipping cases industry.

If you’re interested in learning more about our injection molded cases, please contact Packaging Strategies Inc. by calling 888-774-7557, email [email protected], or click here today!

Follow PSI today on Google+, Facebook, Twitter, and LinkedIn.

Source:
http://www.3dsystems.com/quickparts/learning-center/injection-molding-basics
http://www.beejaymolding.com/molding-advantages.html

This entry was posted on Friday, August 29th, 2014 at 2:48 pm. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.